4 Inch Lift Kit with Bilstein Shocks for 2009-2011 Ram 1500
4 Inch Lift Kit with Bilstein Shocks for 2009-2011 Ram 1500
- Complete front and rear lift kit
- Vehicle-specific fitment
- Includes all required installation hardware
- Most kits are available with Superlift, FOX, or Bilstein shocks
- Limited lifetime warranty
Features:
Replacement knuckles yield best possible alignment specs. Front track width is not increased and factory turning radius is retained.
Front lower control arm crossmembers laser cut from 3/16" material.
Belly pan, constructed of 1/4" material, connects crossmembers and protects differential.
Front anti-sway bar link extensions retain factory "service for life" links.
Superide Dual Rate rear coil springs provide ideal ride, handling and load carrying capability.
New bracketry relocates factory rear 4-link points, anti-sway bar links, brake lines and track bar.
New rear compression travel-stop brackets.
Rear shock options include Superlift or (SS) by Bilstein.
Installs easily with only slight trimming and no exhaust or driveshaft modifications.
Compatible with Dodge's Electronic Stability Program.
NOTE: Will not fit Short Bed Standard Cab models due to rear driveline vibration.
NOTE: TRX model trucks will achieve approximately 1" of additional front lift.
Tire | Wheel | Backspacing | Offset |
---|---|---|---|
35 x 12.5 | 18 x 9 | 4.25 - 5 | - |
35 x 12.5 | 20 x 9 | 5 | - |
IMPORTANT DISCLAIMER: The provided tire/wheel fitments are approximate. Actual dimensions of a given tire size can vary considerably from one brand to another. Manufacturers' wheel offset and backspacing measurement points are not always consistent. Backspacing greatly impacts tire-to-fender clearance when turning. Wheel width and backspacing influence whether the tires protrude past the fenders, and to what extent. Considering these IMPORTANT factors, we recommend that you fit-check your tire/wheel selection prior to purchasing.